- Windows Vista Backup And Restore
- Free Windows Vista Disk
- Windows Vista Install Disk Free
- Windows Vista Backup Software
- Windows Vista System Disk Download
After booting up your HP or Compaq Desktop computer using Windows Vista, be sure to create recovery discs for Windows Vista in HP Recovery Manager. The recovery discs will boot the computer and reset both the operating system and software to factory settings in case of system instability or failure. Restore a backup made on another computer You can restore files from a backup that was created on another computer running Windows Vista or Windows 7. Select the Start button, then select Control Panel System and Maintenance Backup and Restore.
Back in 2006 when Windows Vista was introduced, it came with a brand new feature that is able to burn what’s called a “System repair disc” onto a blank CD. While it isn’t a disc full of utilities that can help you fix a huge number of issues such as the great Hiren’s Boot CD is able to do, there are number of functions built in that can do the basic tasks. These include helping a system with startup issues to boot, enabling you to run an offline system restore, a command prompt where you can use tools such as Diskpart, run the Windows memory diagnostic and restore a full system image backup if your installation is beyond repair.
What’s good about this tool is it’s available in all versions of Windows Vista, Windows 7 and also Windows 8. These same functions are also found on the Windows Install DVD that is used to install the operating system, so you don’t necessarily need to have a repair CD if the install DVD is to hand. The problem with this though is if you own a branded computer or laptop such as Acer, Dell or HP, the chances are they only provided you with a recovery partition or a recovery DVD without the proper Windows DVD. In other words, you need to make your own system repair disc through Windows.
A simple scenario where a repair disc would be useful is if you decide for whatever reason that you want to install Windows XP as well as your current Windows. It’s easy to install Windows XP on a system with Windows 7 or Vista installed, but XP would overwrite the current bootloader making only the XP installation bootable. The system repair disc would be able to reinstall the correct bootloader to make all operating systems bootable.
A few years back the people who make EasyBCD, Neosmart, used to host the Windows bootable repair CD’s although they now charge a fee for their own version of a repair disc. Most other repair discs made by Windows and uploaded to websites have just about all been taken down from the internet by Microsoft actively seeking their removal, for some reason. Here’s how to create your own from within Windows.Creating a Windows Vista Repair Boot CD
Although not immediately obvious in Windows Vista, it does come with the ability to create the repair CD which you can use to repair things like the boot sector, boot failure issues or various other problems. The odd thing about Vista is it appears the function to create the disc was removed in Service Pack 1 onwards. Although the program to create the CD is there, it’s unusable. What you need to do if you have Service Pack 1 or 2 installed is to use the original Recdisc.exe from the RTM version of Vista and replace the current file. Here’s how to do it:
1. As noted above, you need the original Windows Vista RTM Recdisc.exe file to be able to use it with SP1 or SP2. You can download the correct version for your operating system architecture below:
Recdisc for Vista 32-bit | Recdisc for Vista 64-bit
Extract the downloaded zip file to your folder of choice.
2. Download Windows Se7en Files Replacer and extract the 7-Zip file to a folder.
3. If you have Windows UAC (User Account Control) turned off, simply run the Se7en Files Replacer.exe and drop the Recdisc.exe you downloaded from step #1 onto the window. This will replace the file in WindowsSystem32, there’s no need to reboot.
If you have UAC on, run the tool and click the Manual button to the right. Then locate the executable from step #1, and locate the original in C:WindowsSystem32 from the next file dialog, although it should already be pointing to the correct folder. The reason you can’t simply copy and paste the file is because Recdisc.exe has advanced permissions which prohibits it being replaced under normal circumstances.
4. If done correctly, you should now be able to run the repair disc creator. Go to Start or press the Win key and type recdisc. This will open the dialog where the CD/DVD drive can be selected, simply insert a blank disc and press the Create button.
Creating a Windows 7 Repair Boot CD
Thankfully, with Windows 7 it’s far easier to create the repair CD because you don’t have to worry about replacing the Recdisc.exe file like is needed for Vista.
1. All you have to do is press Win or go to Start and type recdisc, then follow the prompts by selecting the optical drive with a blank CD and pressing the button.
If you’re one of those users that doesn’t have a working CD/DVD-RW drive in your computer, it’s normally not possible to create the repair disc because Recdisc requires an optical drive to write to. We have discovered how you can create the ISO file and write a perfectly working repair disc onto USB without using a ROM drive. You can read all about that in our Installing Windows 7 System Recovery Disc onto USB Flash Drive article.
Creating a Windows 8 Repair Disc
Unfortunately, with Windows 8 Microsoft has gone back to playing around with the recovery disc feature like they did in Windows Vista. As it stands, Recdisc is available in Windows 8 but NOT in Windows 8.1. All is not lost though because you still get the new to Windows 8 feature of writing the repair disc directly to USB flash drive.
Using Recdisc in Windows 8
1. The procedure for Recdisc in Windows 8 is the same as Windows 7 and Vista, Press Win key+R to bring up the Run dialog and type recdisc.
Using the USB Recovery Creator in Windows 8/8.1
As mentioned, only this function is available in Windows 8.1 and not Recdisc above. To use it:
1. Either press Win key+R and type recoverydrive or go to Control Panel -> Recovery -> “Create a recovery drive”.
2. At the first window, make sure the tick is not in the “Copy the recovery partition from the PC to the recovery drive” box. Then make sure the flash drive is inserted and press Next.
3. In this window MAKE SURE your USB device has been detected and is the selected drive to write onto. If your flash drive doesn’t show up, it could default to the C: drive as the device to overwrite so special attention is needed here.
4. Press Next when you’re satisfied, then read the final warning and click Create. After a short while the USB recovery drive will be created.
The Windows 8 recovery image is now 200MB+ compared to around 160MB for the Windows image that gets written to CD, but still easily fits on even small flash drives.
You might also like:
Windows Vista Backup And Restore
How To Perform a Repair Install of Windows XPInstalling Windows 7 System Recovery Disc onto USB Flash DriveInstall Windows 7 and Vista MUI Language Packs on Basic, Home Premium, Business or ProHow To Burn Downloaded Windows Vista to DVD or USBFree Windows Vista Disk
vLite is a Windows Vista Configuration Tool that creates Vista LiteDoesn’t work. I replaced the recdisc.exe file by following the instructions. When running recdisc.exe, it asks for the original Vista installation disc. I thought the whole point of this was to make a new recovery disc WITHOUT the need for the installation disc.
ReplyMaybe Vista never had the ability for Recdisc to create a repair CD without the install DVD. I did reinstall Vista today just to test this and it asks me for the install DVD as well.
As this article is nearly 10 years old, I really can’t remember if we missed something out in the steps or we made a simple mistake during testing such as leaving the install DVD in the drive.
We’re sorry if this has caused confusion to you and others, that obviously was not our intention.
ReplyWindows Vista Install Disk Free
I have the same problem as Tim, Michael and Corina. Recdisc.exe asks for the windows disk. If you posted a reply, I cannot find it. I have software which only will run on an old Vista PC. It will not boot half the time and wants to go to startup repair. Like Tim, Michael and Corina, I need help for my old PC.
ReplyI created system repair disc (6 discs total) few years ago. Now my hard drive FAILED (bad sector). How can i restore my Vista to a new hard drive using these system repair discs? Can somebody please give me a step by step procedure from BOOT? my technical level is LOW :) thanks a lot in advance.
ReplySounds great. But during the create disc process it asks for my install disk…which I thought was the point of this article: not having an install disk. I’m just planning to move to an SSD and understand I need the recovery disk to do the boot repair on the clone. That’s all I need. Thanks.
ReplyThank you very much – great blogs.
Windows Vista Backup Software
ReplyMy pc on window 8 instal but now it is automatic repair mode i have not window 8 diskplz tell me how can repair it
ReplyI was able to follow the instructions and install recdisc on a 32-bit Vista computer using the Manual option. I verified that the version of recdisc on my computer is the version I installed today. However, when I run recdisc I get the following error message:
“The selected disc cannot be used. The disc which you selected does not contain a valid Windows installation. Do you want to try a different disc?”
When I hit the “No” button, I get the message:
“Unable to create a recovery disc. A recovery disc cannot be created without the Windows installation disc.”
Any suggestions?
In Vista using the instructions for UAC on, it says the file location does not contain the file selected to be replaced.
Only shows folders no programs.
The old Recdisc.exe is visible using Win Explorer but not in Se7en.
Hi Raymond, thanks for the information. However, on Windows Vista, recdisc asks to insert the Windows installation drive (after Create disc). Is it something I’ve done wrong, or is this version of Vista (Home Premium, SP2)?
ReplyWindows Vista System Disk Download
thank you.. Easy to use n done!!
ReplyHi Raymond,
Would you please help me in the following matter! I run windows Vista Basic Home x32bit on an Acer Aspire. After I ran CCleaner, I cannot boot the system, message “An error occured while attempting to read the boot configuration data. File:BootBCD. Status: Oxc000000f”. I downloaded an iso file with vista, but the only option I got through Acer Recovery is to install Vista from scratch. I do not want to lose all my files!!! But Acer does not have an option to “Repair your computer” only to “Install Windows”. What should I do? I lost many nights trying to fix it! Please, please help!
I have a Acer aspire v3-731 win 8 don’t know if win 8.1
My daughter put a login password on it and has forgot what it is!!!!!
I can get to other bios settings and change the boot sequence but I don’t have a recovery flash drive. I have spotmau and hirens disc but to no avail I can’t get the laptop to boot from the disc.. I’m ready to throw this laptop in the pool…. Any suggestions…..
Quite informative. thank you
ReplyThanks Raymond, it worked great!
Replythanks Raymond for this good informative blog!!
ReplyLeave a Reply